Filter Polypropylene Pleated Filter Cartridge

Item No.: 00101
Low dropout, high flux
High filtering precision
Wide chemical compatibility, long service life
Wide range of filtration precision and large selection
Description Review

Filter Polypropylene Pleated Filter Cartridge



Consumables for cleanliness extraction equipment—the filter element adopts polypropylene microfiltration pleated filter element, and polypropylene (Polypropylene) thermal spray fiber membrane is used as the filter medium. It is an advanced fixed depth filter. The nominal filter accuracy can range from 0.1μm to 60μm. The filter membrane is not affected by the fluctuation of the feed pressure. Its unique low pressure difference, high flux, good filtration accuracy and The lower economic cost has become a new type of filter that replaces the non-fixed filter such as wire wound, cotton cake and cardboard and is very popular among users.



1.Wide chemical compatibility, large flow, low pressure difference, long service life.

2.Wide range of filtration precision and large selection, which can meet various application occasions.

3.The hot-melt process is adopted, which is firm and does not contaminate the product with emissions.

4.It can be cleaned by ordinary methods, and can be sterilized in a high-pressure sterilizer and neatly.



1.Electronic industry: Pre-filtration of reverse osmosis water system.

2.Food industry: filtration of beverages, beer, mineral water, etc.

3.Chemical industry: filtration of organic solvents, inks, etc.

4.Pharmaceutical industry: filtration of pharmaceutical, biological and plasma products, compressed air and gas filtration.

5.Others: filtration of electroplating solution, metal cutting fluid photoresist and magnetic media, etc.


Technical Parameters

Filtration accuracy (μm)


Filter element diameter


Filter area


Length (inches)


Filter media

100% Polypropylene Meltblown Microfiber

Center column and outer cylinder material

High-strength polypropylene

Maximum continuous working pressure

0.42Mpa at 25°C

Maximum back pressure difference

P  0.28Mpa at 60°C

,aximum operating temperature

88°C0.28 Mpa60°C 0.42Mpa

Maximum disinfection temperature

121°C20 minutes each time, 5 times

Interface type (conventional)

Flat seal 215

Type 0 seal material

Silicone Rubber, EPDM, Nitrile, Fluorine Rubber



Send your message to us